| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours 7 Days |
| Warranty: | 10 Years |
|
Still deciding? Get samples of US$ 200/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Color Coated Zinc Aluminum Magnesium Steel coil is a new type of high corrosion resistance coated steel plate. Its coating composition is mainly zinc, which is composed of zinc plus 1.5% - 11% aluminum, 1.5% - 3% magnesium and trace silicon (the proportion of different manufacturers is slightly different).
Compared with traditional coatings such as hot-dip galvanizing, galvanized aluminum, and zinc-iron alloys, zinc-aluminum-magnesium coatings have better corrosion resistance.
(1) Since the zinc-aluminum-magnesium alloy coating is relatively thin and dense, it is not easy to peel off the coating;
(2) The corrosion products will flow and wrap around the cuts, so the protection performance for cuts and defects is better;
(3) It also has good corrosion resistance in some harsh corrosive environments (such as animal husbandry, coastal areas, etc.);
(4) It can replace some stainless steel with low requirements, or be galvanized after processing, etc., which can simplify the user's processing procedures.
| Thickness | 0.125-2mm | |
| Tolerance | Thickness: ± 0.01mm | |
| Width | 600-1250mm ( Normal:1250, 1200,1000,914 mm) | |
| Top Paint | 10-25 micron(Normal:10-12mic) | |
| Back paint | 5-12 micron(Normal:5-7mic) | |
| Coating | Zn coating | AZ coating |
| 30-400gsm | 30-400gsm | |
| Coil weight | 3-5 tons or as your requirement. | |
| Coil ID | 508/610 mm | |
| Grade | Galvanized | Galvalume |
| SGCC/DX51D+Z, DX52D+Z, SGCD/DX53D+Z,SGCE/DX54D+Z, SGCH....... |
DX51D+AZ, DX52D+AZ, DX53D+AZ, DX54D+AZ,SGLCC,SGLCD,SGLC4 40,SGLHC........ |
|
| Coating type | Top paint: PE, SMP, HDP, PVDF, PU | |
| Functions: Decorative, Machinability, Weather resistance, Scrath resistance, Stain resistance, Chemical resistance, Adhesion resistance |
||
| Primer paint: Polyurethane, Epoxy, PE | ||
| Functions:Machinability, Corrosive resistance, Adhesion, Scrath resistance |
||
| Back paint: Epoxy, Modified polyester | ||
| Functions: Scrath resistance, Bending adhesion, Corrosive resistance | ||
| Type of coating process |
Front: Doulbe coated & double drying | |
| Back: Double coated & double drying, single coated & double drying | ||
| Double coated & double drying is used for corrugated sheet | ||
| Double coated & single drying is for sandwich panel | ||
){kind=link}