Prime Quality Dx51d+Zm Aluminized Magnesium Zinc Steel Coil

• Customization: Available
• After-sales Service: 24 Hours 7 Days
• Warranty: 10 Years
• Model NO.: Al-Zn-Mg Coil
• Certification: ISO, RoHS, IBR
• Surface Treatment: Coated
• Technique: Cold Rolled
• Application: Construction Building
• Edge: Mill
• Stock: Stock
• Tensile Strength: 270-350MPa
• Spangle Type: Regular Spangle
• Usage: Car Construction
• Al Zn Coating: 30, 40, 50, 60, 75, 90G/M2
• Coating: Zam81-Zam120
• Length: 2000-12000mm or Customized
• Thickness: 0.3-2.0mm
• Yield Strength: 190-360MPa
• Coil Weight: 5 Ton
• Width: 800-1250mm
• Payment: 30%T/T Advance + 70% Balance
• Aluminium Content: 55%
• Hardness: Full Hard
• Price Term: CIF CFR Fob EXW
• MOQ: 5 Ton
• Transport Package: Standard Sea Freight
• Specification: 0.15mm -- 5.0mm
• Trademark: Desheng
• Origin: China
• HS Code: 721049000
• Production Capacity: 2000 Tons Per Month

Product Description

Product Description

Zinc - Aluminum- Magnesium Steel  

Zinc-aluminum-magnesium coating is a ternary alloy coating whose main component is zinc, and the content of aluminum and magnesium is between 1.5-8% (where the magnesium content is not less than 0.2%).

Following European Standard EN10346-2015, Zn-Al-Mg coating is a ternary alloy coating whose main component is zinc, in addition to aluminum and magnesium content between 1.5~8% (of which the magnesium content is not less than 0.2%). Zn-Al-Mg coating has superior corrosion resistance to traditional coatings such as hot-dip galvanizing, zinc-aluminum and zinc-iron alloy.

Compared with traditional coatings such as hot-dip galvanizing, galvanized aluminum, and zinc-iron alloys, zinc-aluminum-magnesium coatings have better corrosion resistance.

(1) Since the zinc-aluminum-magnesium alloy coating is relatively thin and dense, it is not easy to peel off the coating;

(2) The corrosion products will flow and wrap around the cuts, so the protection performance for cuts and defects is better;

(3) It also has good corrosion resistance in some harsh corrosive environments (such as animal husbandry, coastal areas, etc.);

(4) It can replace some stainless steel with low requirements, or be galvanized after processing, etc., which can simplify the user's processing procedures.

Detailed Photos

 

Product Parameters

Type	Coil/Sheet/Plate/Strip
Thickness	0.12-6.00mm,or customer's requirement
Width	600mm-1500mm, according to customer's requirement
Type of Coating	Hot Dipped Galvanized Steel(HDGI)
Zinc Coating	30-275g/m2
Surface Treatment	Passivation(C), Oiling(O), Lacquer sealing(L), Phosphating(P), Untreated(U)
Surface Structure	Normal spangle coating(NS), minimized spangle coating(MS), spangle-free(FS)
Quality	Approved by SGS,ISO
Coil Weight	3-20 metric ton per coil
Package	Water proof paper is inner packing,galvanized steel or coated steel sheet is outer packing , side guard plate,then wrapped by seven steel belt.or according to customer's requirement

Certifications

Our Advantages

 

 

Test and Qualification

Company Profile

 

FAQ